[25% Off] Pump Sizing & Modeling Piping Systems For Liquids Course Coupon – Free learning guide

[25% Off] Pump Sizing & Modeling Piping Systems For Liquids Course Coupon


Chapter 1: Introduction

1. Differentiate between incompressible and compressible fluids using the continuity equation.

2. Define and understand general concepts in fluid dynamics, such as viscosity (dynamic and kinematic), Reynolds number (laminar and turbulent flow), and volumetric flow rate.

Chapter 2: Energy Balance

3. Derive and apply the Bernoulli equation to develop an energy balance for sizing pumps.

4. Understand the pump equation and its relation to the Bernoulli equation.

5. Apply the pump equation to an illustrative example.

6. Create system curves for a piping system.

Chapter 3: Friction Headloss

7. Understand hydraulic resistances in pipes.

8. Define the Darcy equation and its application in calculating frictional headloss.

9. Define the resistance coefficient (K) and calculate it using different methods.

10. Define the friction factor (f) and calculate it using numerical methods via the Poiseuille equation, Colebrook equation, Swamee Jain equation, or the Moody chart.

11. Understand the effect of pipe age on friction factor.

12. Define flow coefficient (Cv) and its application in calculating pressure drop.

13. Adjust Cv for liquids with different viscosities.

14. Find the capacity flow rate at different pressure drops for a given Cv.

15. Convert flow coefficient (Cv) to a resistant coefficient (K).

16. Understand the use of orifice plates and use the orifice design equation to size orifice plates.

17. Apply the orifice design equation in an illustrative example.

Chapter 4: Pumps

18. Identify and understand the basic components of a pump.

19. Calculate pumps Hydraulic Horsepower (HHP), Brake Horsepower (BHP), Pump Efficiency, Motor Power (MP), and Motor Efficiency through an example.

20. Understand pump curves (head vs flow rate) for different impeller speeds (or diameters).

21. Understand pump efficiency curves.

22. Understand Pumps Net Positive Suction Head Required (NPSHr) Curve.

23. Understand Pump Power Consumption Curve.

Chapter 5: System Modeling and Pump Sizing Roadmap

24. Model resistance in series for a piping system.

25. Develop a roadmap for proper selection of pumps.

Chapter 6: Case Study 1

26. Apply the pump sizing roadmap using Macros in Excel to select an appropriate pump for a real-world case study.

Chapter 7: Control Valves

27. Identify different types of control valves and their applications.

28. Understand the inherent valve curve and its relation to flow rate and pressure drop.

29. Define valve authority and its significance in valve selection.

30. Size valves appropriately for a given system.

If the coupon is not opening, disable Adblock, or try another browser.

Related Posts

[100% Off] Oil & Gas Industry Operations and Markets Free Course Coupon

Description The oil and gas industry has an enormous impact on all aspects of daily life. Individuals, corporations, and national governments make financial and policy decisions based…

[100% Off] Mechanics of Materials I: Fundamentals of Stress & Strain an Free Course Coupon

Description This course explores the topic of solid objects subjected to stress and strain. The methods taught in the course are used to predict the response of…

[100% Off] Environmental Management & Ethics Free Course Coupon

Description Decision-makers often turn to scientists and engineers to assist them to navigate through complex environmental, health and societal challenges pervaded by systemic uncertainty, ambiguity and ethical…

[25% Off] Engineering Statics online course Complete Course & examples Course Coupon

Description Course Description Statics is the basis for all other courses in mechanical Engineering. Statics. Statics Deals with the Equilibrium of Bodies, That Is Those That Are…

[25% Off] Engineering Dynamics course & examples, 15+hours mechanical Course Coupon

Description Dynamics Engineering mechanics is both a foundation and a framework for most of the branches of engineering. Many of the topics in such areas as civil,…

[100% Off] Introduction to Planning & Institutional Processes in Developing Countries Free Course Coupon

Description This introductory course helps students learn to pose questions and analyze problems in the field of planning in developing countries. Not arguing for one “right” approach,…